Takaab MIX-X-1U - Two Channel Expander for Takaab MIX v2, 2MIX & 2MIX-1U Low-pass Gate In LFO mode the module

In LFO mode the module loops constantly through the 4 stages of the envelope regardless of any gate input (release happens as soon as the decay drops down to the sustain level)

A simple 2HP clock divider with odd and less common divisions

2x8 or even 2x16 CV channels

2x M3 screws

Takaab MIX-X-1U - Two Channel Expander for Takaab MIX v2, 2MIX & 2MIX-1U Low-pass Gate In LFO mode the module* This is a not a standalone module. For use only with Takaab MIX v2, Takaab 2MIX or 2MIX 1U * Adds two extra attenuated channels to the Takaab MIX. or Takaab 2MIX. Connections Use a 2. 54mm 2 pin jumper cable to connect to one of the three pin pairs on the MIX, 2MIX or 2MIX 1U. Make sure to connect GND to GND (top row of pins) and SIG to SIG (bottom row); the cable should not twist. You can connect up to three MIX Xs to one MIX this way. Package